Industry News

The 300 series stainless steel, including grades such as 304, 316, and 321, contains a minimum of 18% chromium and 8% nickel. It is highly corrosion-resistant and ideal for use in harsh environments, like chemical processing plants and marine applications. It is also popular in construction, consumer goods, and automotive industries due to its strength and shiny finish. Overall, 300 series stainless steel is a versatile material that offers a wide range of benefits and is widely used across various industries.

Stainless steel plate is an alloy steel with smooth surface, high weldability, corrosion resistance, polishability, heat resistance, corrosion resistance and other characteristics. It is widely used in various industries and is an important material in modern industry. Stainless steel is divided into austenitic stainless steel, ferritic stainless steel, martensitic stainless steel, and duplex stainless steel according to the structure state. Austenitic Stainless Steel: stainless steel with an austenitic structure at room temperature. Steel contains Cr≈18%, Ni≈8%-25% and C≈0.1%. Steel has high toughness and plasticity, but low strength.

The Coiled rebars/spooled rebars are round steel bars with relatively small diameter. Common Grade of Spooled Rebar is HRB400 and HRB500. The product form is spooled rolled rebar for supply. The common ones are 10 mm, 13 mm, 16 mm and 19 mm in diameter. Drives are mostly low -carbon steel, generally not used for the main tendons of reinforced concrete structures, mostly used for reinforced steel sleeves, as well as small diameter for "brick-and-tendon" in brick -concrete structures.

ASTM 1045 Seamle Steel pipe is a high-quality carbon structural steel tube with a carbon content of 0.42-0.50%, a tensile strength of 610MPa, and a yield point of 360MPa; it is used for general shaft parts.

Angle Steel is "L" shaped. The common types of Steel Iron Angles are at 45 degree and 90 degree angle. Angle Steel products has good weldability, plastic deformation performance and a certain mechanical strength, be used in Architectural structure and engineering structure.

The characteristics of aluminum foil for pharmaceutical packaging: 1. The surface is clean, uniform, no flower spots, flat and no holes. 2. Non -toxic and tasteless, safe and hygienic. 3. Strong mechanical properties, high explosion -resistant performance, and strong anti -puncture and tear performance.

Aircraft aluminum plate is a specially treated aluminum alloy such as high temperature oxidation. It can withstand thousands of degrees of high temperature or strong impact. It is an aluminum product with high strength and anticorrosive properties.

Stainless steel flat steel is a kind of stainless steel, its grades are: 201, 202, 301, 302, etc., of which 304 is the most commonly used material. Stainless steel flat steel is mainly used as raw material for the production of deep-drawing products. It can also be used as raw material for drawing welded steel billets and seamless steel billets.